Power Inverter

Features Specifications » Power Inverter

Test conditions:
- Operating temperature: 23 ±2 degrees C
- Operating relative humidity: 40 to 90% RH
- Input: 12.5V DC
Specifications (based on test conditions above):
- Maximum continuous output power: 300W
- Surge capability peak output power: 600W
- DC input static current (no load): 0.8A
- DC input over load current: 30 to 38A
- AC output wave form: pure sine wave
- Normal input voltage range: 11 to 15V
- High voltage cut off level: more than 15V
- Low voltage alarm: 10.5 ±0.5V
- Low voltage cut off level: 10.2 ±0.5V
- Output AC voltage (at DC 11 to 15V input): 115V DC ±10% RMS
- Output frequency level: 60 ±3Hz
- Overload power range: 300W, 5 to 30%
- Hi-pot test: primary/sec, 1,500V/AC 5mA/3s
- Temperature protection: less than 65 degrees C
- Full load maximum optimum efficiency: ≥80%
- AC output short-circuit protection: system shut down (no damage)
- Fan run: inner temperature rising up is ≥45 degrees C
- Fault warning: alarm beep
LED indicator:
- Normal: green
- Fault: red green
- Fuse (spade type): 25A x 16 pieces
Dimensions (L x W x H): 211 x 147 x 73mm
Environmental condition:
- Operating temperature: 0 to 40 degrees C
- Operating relative humidity: 10-90% RH
- Storage temperature: -10 to -50 degrees C
- Storage relative humidity: 10 to 95% RH